NanoSox
- 01. Y- inlet
- 02. Square to round inlet
- 03. T-connection
- 04. Elbow
- 05. Transition
- 06. Bevel end
- 07. Expansion segment
- 08. Tension ring
- 09. Wall pass through
- 10. Galvanized cable
- 11. H-track
- 12. Flush mount track
General Fittings
INLET CONNECTION
Double layer inlet
Single layer inlet
Generally, use single layer or double layer inlet to cover outlet of metal duct, fixed with belt, riveted.
Nanosox®-N employs double layer inlet, only fixes the inside layer,
the outer layer is used to cover up and easy to remove for washing.
Nanosox®-L uses single layer inlet.
END
End cup
Fixed end
Nanosox®-N uses end cap, joins with duct by zipper, easier to change for washing or extend in the length direction .
Nanosox®-L employs fixed end, to seam at the end becoming a part of duct.
ZIPPER CONNECTION
Common zipper
Concealed zipper
Join among straight duct, fittings, and components, similar toconventional used flange.
Nanosox®-N uses concealed zipper, covered by sleeve fromoutside.Nanosox®-L uses common zipper.
ELBOW-E
Standard centerline radius is 1.5 x Dia.
The elbow consists of multiple gores, different curve angles per application requirement.
TRANSITION-V
Bottom Flat
Concentrate
Top Flat
Connect ducts with different diameter
Bottom flat: more aesthetic Concentrate: better airflow Top flat: easier to install
T-CONNECTOR-T
Top Flat
Concentrate
Bottom Flat
Deliver the airflow to branch ducts which are
perpendicular to main duct. Connected by zipper.
Special fittings
-
Y-inlet-Y
Connect two outlets of AHU to one duct.
-
Square to round inlet-SR
Connect square metal duct to round fabric duct.
-
Elbow inlet-IE
Connect fabric duct inletwith elbows.
-
T-connector inlet-IT
Connect fabric duct inlet with T-connection.
-
Bevel end-BC
Disperse air in bevel end of duct , S pecialized for individual case.
-
Transition lbow-EV
Connect elbows in different diameter.
-
Bevel transition-BV
Connect uneven ducts with different diameters.
Functional fittings
-
Tension ring-TW
For supporting use, fixed inside duct to produce aesthetic appearance, applied to upright elbows, etc special occasions.
-
Expansion segment-ES
Connected between two sections, Fold one end in airflow direction, fixed by hasp from outside, contributing to certain flexibility in length.
-
Wall pass through-TR
A component to resolve through wall problem, employs tension ring and certain length of duct to fix in the hole of wall and seal the gap between.